NFPA 70E

Arc Flash Hazard Study – 5 Ways You Can Ruin It

The complete article written by Steve Coleman and Aleen Mohammed (PeGuru admin) is published in the Electrical Construction & Maintenance magazine. Read this article on ECMweb at: http://ecmweb.com/arc-flash/arc-flash-hazard-evaluation Article Abstract: If you are conducting an arc flash study, you are probably using one of the many software packages that can perform the analysis for you …

Arc Flash Hazard Study – 5 Ways You Can Ruin It Read More »

Arc flash vs the HRC4 - 40Cal suit

Arc Flash Hazard Study – The Basics

Arc flash hazard is a huge concern in areas where you are operating medium voltage (1kV – 34kV) and low voltage (less than 1kV) equipment. Mostly because, when you inadvertently initiate a fault, an arc flash ensuing it releases enormous amount of heat energy. The composition of this arc includes molten bits of copper or aluminium busbar or cable.

Arc flash vs the HRC4 - 40Cal suit
Scroll to Top